There are 2 units that are separately attached to a pipe detector. A pipe detector has 2 separate units called the transmitter and the receiver. The receiver is where the transmitter projects its beam. To ensure protection during the operation, a signal in its specific amount should be received by the receiver. To ensure safety, make sure no unfamiliar object should come across the beam.

 

There are different ways to use a pipe detector.

 

There are two types of pipe detectors and these are the wired and the wireless type. The wired type of pipe detector needs power for the receiver and the transmitter. A lot of people recommend that you choose a good location for your units or else you will have a hard time. To ensure protection, all wirings should be covered.

 

Pipe detectors have plenty of benefits.

 

There are a lot of people who are now using pipe detectors than the traditional motion detectors because of its many different advantages. They are also known to be invisible barrier. Unlike other traditional motion sensors, contacts can easily be open once something come across the beam. In order for these devices to work properly such as sending signals to the center of the station, they must be connected to many sources and should not work individually. If you are concern about  the size of the area they can protect, a tracer wire locator and pipe detectors have larger protection areas than the traditional motion sensors.

 

For all types of security systems, this kind of wired detector can work well with all of them. It is important that the kind of security system you own is compatible with the type of detector you will choose. One important thing to remember when it comes to wireless system is that they need batteries. It would cost you around $60-$80 yearly for replacements which is expensive if you are using a wireless system that carries 20 devices.

 

If you are wondering, there are a lot of ways to install pipe detectors.

 

Installing a buried line locator and pipe detectors can be harmful to the surroundings that is why it is important that you consider the protection of the area first before installation. There are a lot of things to consider before installation such as the condition of the weather in the location. If you plan to install pipe detectors, make sure the location is not windy. Beams are usually sensitive and therefore alarms are easily triggered such as paper blows or when boxes come across it. You must also consider the presence of pets that can trigger false alarms. If you want to avoid false alarms and other possible problems, make sure the location is far from wild animals. When installing a device, make sure that the height is not too high enough to trigger false alarms or not too high enough for intruders to duck below which can cause harm.